Mobile CAD Surveying Ltd

£3,295.00
reduced to 

Topcon GTS105N  (non reflectorless)

The Topcon GTS-105N is a 5sec instrument ideal for setting out, with 30x magnification and can store up to 24.000 points in internal memory in addition to Topcons onboard software.

Easy to use

With its expanded full numeric keypad it is easy to input points and layout information including calculations. Contractors and grade setters can re-set stakes check grade topo and perform basic lay out. Backlit LCD and user definable display parameters are also standard.

Cost efficient solution

The GTS-105N is packaged with everything you need and its ease of operation will keep it simple: set-up the instrument record your points on the unit or link it to a logger. Getting the job done has never been this cost efficient.

Telescope
Length 1500mm
Objective Lens Diameter 45mm (EDM: 50mm)
Magnification 30X
Resolving Power 3"
Minimum Focusing Distance 1.3m

Distance Measurement
1 Prism 2,000m
3 Prism 2,700m
Accuracy ± (2mm + 2 ppm x D) m.s.e.

Measuring Time
Fine Mode 1mm : 1.2 sec. (initial 4 sec)
0.2mm: 2.8 sec. (initial 5 sec)
Coarse Mode 0.7 sec (initial 3 sec)
Tracking Mode 0.4 sec (initial 3 sec)

Tilt Correction
Tilt Sensor Single Axis
Method Liquid Type
Compensating Range ±3'
Correction Unit 1"

Display
Display Unit 2 side
Display Type dot matrix graphic LCD (160 X 64 dot)
Keyboard 24 keys

Battery Life
Angle and Distance Measurement 9h
Angle Measurement Only 40h

Others
Serial Signal Connection Yes
Bluetooth No
Environmental Protection IP54
Internal Data Memory 24,000 pts
Ambient Temperature Range -20°C to + 50°C (-4°F to + 122°F)
Point Guide No
Plummet Optical Only