Buy 2 and SAVE £20.00
Leica Disto D3 - The Multi Talented One (Replaces the Leica Disto A3)
Measure distances and tilts
Simple, quick and reliable
The Leica DISTO™ D3 is a multi-functional instrument to ensure simple, quick and reliable measurements. You can measure distances with pinpoint accuracy – in spite of nearby obstructions – and determine angles quickly and precisely. The small, elegant Leica DISTO™ D3 is a reliable instrument to suit every pocket.
Clear display
4-line display shows everything at a glance
Secure hold
Softgrip and ergonomic design
Simple to use
Perfectly sized buttons
Quick
Direct keys for main functions
Robust
Protected against spray water and dust (IP 54)
Handy size
125 x 45 x 24 mm
Tilt measurement
The instrument's inbuilt tilt sensor quickly and simply determines tilts up to ± 45°. The tilt sensor can also provide you with true horizontal distances. Reliable measurements are therefore guaranteed.
Multifunctional end piece
Aim the instrument straight at the target point, whether measuring out of corners, slots or from edges: with this end piece you are prepared for all measuring situations. The instrument detects the end piece automatically, which helps you avoid expensive measuring errors.
Automatic keypad and display illumination
An built-in sensor detects if the environment is dark and switches on the illumination of the keypad and display. You can also measure in the dark without any problem.
Multiple functions
The Leica DISTO™ D3 can also calculate areas, volumes, room dimensions and various types of Pythagorean functions. A time delay release and enough memory for up to 20 measurements finish off the instruments wide range of functions – a concept designed to make your work easier.
Indirect Pythagorean measurement
Single Pythagorean measurement
Just two measurements are enough to indirectly calculate the horizontal or vertical distances. It is important to ensure the 2nd measurement is at right angles to the target object – easy with minimum measurements.
Double Pythagorean measurement
Using a tripod you can measure horizontal and vertical distances. The Leica DISTO™ D3 determines the results for you out of three measurements. Functions such as minimum and maximum measurement help you find the correct measuring point.
Double Pythagorean measurement (chain values)
With three measurements you can determine partial heights, e.g. window heights. Possible for horizontal and vertical distances.
Indirect tilt measurement
Tilt measurement
The tilt sensor measures tilts up to ± 45° and a typical use is for determining the pitch of a roof. When measuring tilts, the instrument should be held in the horizontal position (± 10°).
Horizontal distance
The tilt measurement function allows you to determine a horizontal distance even if the target point is not directly visible. This is particularly useful when there are obstructions, e.g. walls directly between you and the target point.
Room corner angle function
The angle in a triangle can be determined by measuring the three sides. This function is suitable for e.g. checking a rightangled room corner. First, measure the two shorter sides and then take the length of the diagonal as the third measurement. The device then displays the room angle.
Staking out function
Two different distances (a and b) can be entered into the instrument and then subtracted from specific measured lengths. This enables you to see the direction in which the Leica DISTO™ D3 must be moved, the display shows a direction arrow with the current staking-out distance. At a distance of 0.1 m to the next staking-out point the instrument gives an audible signal.
Technical specifications D3
Measuring accuracy typically: ±1.0 mm
Range: 0.05 to 100 m
Power Range Technology: YES
Distance in m: 10, 50, 100 m
Ø laser-spot in mm: 6, 30, 60 mm
Minimum and maximum measurements: YES
Continuous measurement: YES
Addition / subtraction: YES
Staking-out function, multiple: YES
Area / volume measurements: YES
Room calculations: YES
Angles: YES
Indirect measurement by Pythagoras: YES
Indirect measurement with tilt sensor: YES
Tilt sensor
Measurement range: ± 45°
Accuracy to laser beam: ± 0.3°
Accuracy to housing: ± 0.3°
Units in tilt sensor: ± 0.0°, 0.00%
Store constant value: 1
Recall last values: 20
Time delay release: YES
Automatic keypad und display illumination: YES
Measuring units: 0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0’ 00’’ 1/32, 0.0 in, 0 1/32 in
Measurements per battery set: up to 5.000
Multifunctional end piece: YES
Tripod thread: YES
Batteries Type: AAA 2 x 1.5V
Spray proof / dust protected IP54: YES
Dimensions: 125 x 45 x 24 mm
Weight with batteries: 110 g
Includes:
Holster - Stows everything away neatly
Target plate - Allows accurate measurement on a non-reflective surface.
Wrist strap - Secures the instrument at all heights
 |  |  |
 |  |  |
