
Look-See Complete Survey System (all items listed below)
The CS200 is a rugged, yet lightweight, system all contained within an easy to carry case.
* 5.6" LCD Monitor
* 35mm Colour Camera
* 30m Tough Cable
* Protective skid
* 3.5" Centralising skid
* Rugged, lightweight case
* Only 6.1kgs
The CS200 is a rugged, easy to use, Look-See system.
The unit features a 5.6" LCD Monitor, 35mm colour camera, 30m tough cable, and 2 protective skids. All of this is stored within a rugged, yet lightweight case (6.1kgs), making the unit extremely portable, and easy to store.
The unit can be powered by 100-230v ac, or by a cigarette lighter socket providing 12v. The unit may also be powered by a rechargeable battery pack (available seperately), allowing up to 3 hours use. The inclusion of a video out socket also enables the system to be connected to almost any external recording device.
The camera itself is mounted on the end of a 30m length of tough cable, and incorporates a lockfast fitting, allowing the camera to be propelled down the pipeline using a set of standard drain rods or as in our kit the Cobra Push Rid system. The Cobra system are a better alternative to drain rods, which do not involve the hassle of screwing several sections together.
PLUS

The Cobra is the thinking alternative to drain roads.
Cobras are a one piece fibreglass rod, with lockfast fitting, which coils neatly in to a cage, and ends the chore of screwing multiple rods together. They are fast convienient and easy to use, and avaialble in a range of diameters and lengths.
*9.0mm Diameter
*40M Length
PLUS

Mini DVR2 Recorder with Bullet Camera
This is the all new updated version of the already very popular MiniDVR 1 system.
The MiniDVR 2 is a small hand held solid state digital recorder supplied with it's very own 520tvl bullet camera using the Sony Exview CCD and new NexT chipset as found in the HQ2 bullet camera. This camera is fitted with an 82 degree wide angled lens.
The camera has one cable which plugs directly in to the MiniDVR 2 and each battery (2 batteries supplied) will give nearly two hours of record time whilst powering the camera as well.
A variable gain mic in the recorder part will capture good quality audio along with your video.
Some significant improvements have been made over the MiniDVR1.
The MiniDVR2 has a higher recording resolution of up to 720 x 576 @ 25/30fps and so has higher video quality. It takes normal sized SDHC memory cards up to 32gb in size which will hold over 25 hours of video.
This new version has motion detection modes and a 20 second pre-event record function. It has a brighter LCD screen with higher resolution and a built-in speaker making it much nicer to play back your videos. Cables are also supplied so you can plug the unit in to your TV to watch your videos.
A vibration alert will tell you when the unit is running out of power or memory and will also let you know if the camera is disconnected.
A new cyclic recording mode has been added for loop recording. It's now easier to use than ever before with a simple record switch on the side. Switch it to the record position and the unit turns on and starts recording in less than 5 seconds.
In short, the manufacturers listened to everything we told them the MiniDVR1 should do and they've come up with the goods!
Spec:
- Display size: 2.5" TFT LCD
- Luminance: 250cd/m2
- Contrast: 200:1
- Format: AVI
- Resolution: 720 x 576
- Bit rate: 3.2mb/s
- USB: 2.0
- Camera 520tvl Sony Exview (NeXT chipset super low light)
- 2Gb SD card
The bullet camera part of this kit is fully waterproof but the recorder part needs to be protected from getting wet.





MEP - Moisture Encounter Plus