Sitemaster Elevations - Screen Shots

 
T: 0871 789 2609 24hrs 

Email Us

My status

mobilecadsurveying
 

 
 

 
Sitemaster Elevations - Screen Shots                          Sitemaster Building - Screen Shots
(Please Note! this page may take a few seconds to load) 


Start with a Photograph scanned or from a digital camera, load it into SM Elevations
 


Lens Correct the photo - this will straighten a known straight or flat surface - Lens Correction takes about 30 seconds.


Calibrate the photo - all you need is two known dimensions x-y axis, this takes about 10 seconds
 


Trace the features of the building that are shown in the photograph.  Making sure that this is done accurately - if many windows/features are the same, just do one of them because they can be copied easily in CAD.
 


Examples of tracings
 


When the tracing/measuring is complete, Sitemaster Elevations produces a complete report.
 


Next Export to CAD or DXF files - we usually use Sitemaster Building as our CAD programme, but any CAD programme will work well.
 


Sitemaster Building or your CAD programme receives the rectified data - examples are for illustration purposes only and are not finished
 


another example of exported data
 


Finish your Elevational drawings in Sitemaster Building or your CAD programme
 

            Front Elevation - Finished

            Rear Elevation - Finished
 
Example of Finished Elevations and a Section through the Building
 

Some Features
 
  • Open jpg,bmp,tiff and png images
  • Interactive Zoom function
  • Measure any part of the photograph
  • Report on floor areas, wall areas and window openings
  • Print the reports
  • Export the data in perspective or rectified mode
  • Export into various CAD data formats

    •  

    General Information
     
     
    Photographic Facade Survey

    SiteMaster Elevation is an independent add-on for SiteMaster. You can benefit from photogrammetric procedures by determining detailed measurements from freehand digital photographs or scanned images.

    SiteMaster Elevation requires only one rectangle with two known side lengths for calibrating an image plan. The software lets you measure and draw a building in 2D with added height information on flo    ors, openings etc.

    It saves the exact measurement results by redrawing the image with points, lines, rectangles, polylines, arcs and circles. SiteMaster Elevation transfers drawing elements with state-of-the-art technology to your CAD system, e.g. or SiteMaster Building. After completing your measurements you can generate a report list of all measurements and areas. The results can be exported in excel lists.      
     Processing digital photographs of the building's facade in SiteMaster Elevation allows you to enhance your project into a full 3D plan with precise exterior views.

    You can exchange drawing files between SiteMaster Elevation, SiteMaster (and other solutions) using the .FLX (PowerCAD) and .DXF file formats.      

    Note! Precision is approximately 5mm over 8 metres when using a 6megapixal camera. A     high resolution and large image and large calibration plane will give max precision and ability to zoom/pick points.
     
         
         
         
    All Screenshots are Copyright of Mobile CAD Surveying Ltd and may not be reproduced without their express written permission.  
    Copyright August 2008 by Mobile CAD Surveying Ltd